4. Software Reference

Display Video Method

Display Video Method lets you select ways to display video on your monitor: BOB (default) or WEAVE. These methods are simple ways of correcting interlaced display.ASUS Digital VCR by default will use the bob method for correcting interlaced display. If your video contains no motion, weave would be a best choice. For more information, visit www.microsoft.com/hwdev/devdes/vpe.htm#Interleaved.

Video Scan Option

Video Scan Option lets you select the scanning method to use: Normal (default), Skip Odd Field, and Skip Even Field. Use this option to reduce the strobing effect that results from fast moving objects when rendering to video. Normal uses both fields to render the video output. For PAL output, use Skip Odd Field and for NTSC output, use Skip Even Field.

Video Standard

Video Standard lets you select the video srandard to use for display: NTSC-M(de- fault), NTSC-N, NTSC-4.43, PAL-BGHI, PAL-M, PAL-N, PAL-4.43or SECAM.

NOTE: Users of the PAL D/K models should select PAL-BGHI for the Video Standard.

If desired, you may adjust the Brightness, Contrast, Saturation, and Hue of the VCR monitor. Use your mouse/pointing device to make the necessary adjustments.

Click again the Video Source Option (F9) button on the ASUS Live Control Panel to exit from the video source option screen.

Use Hardware Pre-filtering function

Use Hardware Pre-Filtering function (default: disabled) lets you use your graphics card for pre-filtering (pre-smoothing the image before compression encoding).

4. S/W Reference ASUS Digital VCR

ASUS V7100 Series User’s Manual

85