AT&T 7313H, 7317H, 7315H, 7314H, 7316H manual Bridging, Call Coverage

Bridging

To answer a bridged call 1 Press xxxxx of bridged call

Note: If your voice terminal has Ringing Appearance Preference, this step is not necessary; you will automatically be connected to the call when you lift the handset.

To use Manual Exclusion 1 Press Exclusion xxxxx while connected to the call

to prevent other bridged	Note: Pressing Exclusion xxxxx	again reactivates
terminals from entering a
	bridging.
call (on a per-call basis)

Call Coverage

To answer a call for a co- worker for whom you are a coverage point

1 Press xxxxx of incoming call when ring begins or green light flashes

Note: If your voice terminal has Ringing Appearance Preference, this step is not necessary; you will automatically be connected to the call when you lift the handset. Also, the call is not at your voice terminal until the green light is flashing.

To leave a message for a	1 Press Coverage Callback while connected to the call
co-worker to call the	[confirmation tone]
original caller’s extension	Note: To leave a message for a co-worker to call you,
	activate Leave Word Calling instead.

15