Hold/Pause button
Liquid Crystal Display (LCD)
Message button
Message light
Microphone/Mic button
Microphone light
Mode switch
Recall button
Ringer volume control
Set button
Speakerphone button
Speakerphone light
For putting a call on hold. The Pause subfeature is not supported by AT&T DEFINITY® Communications System Generic 1. (Pause can be programmed into an abbreviated dial string by pressing "8" rather than pressing the Pause button.)
Available only on the 7315H and 7317H voice terminals, a
A fixed feature button, not supported by AT&T DEFINITY® Communications System Generic 1.
A green light which goes on steadily when a message has been left for you.
A fixed feature which comes on automatically when an internal automatic answer call is answered. It can also be turned on or off manually.
A green light which goes on steadily when the microphone is activated.
A sliding switch with 3 settings - test (T), operate ( ) and program (P). To test your voice terminal’s ringer and lights (and the alarm on display voice terminals), slide the switch up away from you (T) - the ringer will sound and the red and green lights will flash alternately until you
release the switch. (See your System Manager if either the ringer or the lights do not respond during the test.) To operate your voice terminal, slide the switch to the center position ( ). The program mode (P) is not supported by AT&T DEFINITY® Communications System Generic 1.
A fixed feature button, not supported by AT&T DEFINITY® Communications System Generic 1.
A sliding switch to control the volume for the tone ringer. Slide it up away from you (Hi) for a louder ring, down toward you (Lo) for a quieter ring.
Available only on the 7315H and 7317H display voice terminals, used with Timer Start/Fwd, Timer Stop/Rev and Time/Timer Exit to set time related information on the Liquid Crystal Display.
A fixed feature button, with a single LED visual indicator, for accessing the
A green light which goes on steadily when the
4
