Bridging
To answer a bridged call Press [ xxxxx ] of bridged call
Note: If your terminal has Ringing Appearance
Preference, this step is not necessary; you will
automatically be connected to the call when you lift
the handset.
To use Manual Exclusion Press [ Excl xxxxx ] while connected to the call
to prevent other bridged
terminals from entering a Note: Pressing [ Excl xxxxx ] again reactivates
bridging.
call (on a per call basis)
Call Coverage
To answer a call for a Press [ xxxxx ] of incoming call when ring begins or
co-worker for whom you
green light flashes
are a coverage point Note: The call is not at your terminal until the
green light is flashing.
1
1
1
To leave a message for a Press [ Cvr Callbk ] while connected to the call
co-worker to call the [confirmation tone]
original caller’s extension Note: To leave a message for a co-worker to call you,
activate Leave Word Calling instead.
1
To talk privately with a Press [ Transfer ]
[dial tone]
co-worker after Call is put on hold
answering a redirected
call
Press [ Consult ] [priority ring to co-worker]
or Dial co-worker’s extension
1
2
●
14