Transfer

To send present call to another extension or outside number

Note: See your System Manager to determine if you can transfer a call to an outside number

1 Press [ Transfer ]

[dial tone]

Present call put on hold and you are given a new call appearance

2Dial extension or number to which the call is to be

transferred

[ringback tone]

Remain on the line and announce call if desired; if no answer or number dialed is busy, return to held call by pressing its call appearance

3Press [ Transfer ] again

Call is sent to dialed extension or number

4Hang up or press [ Drop ]

Display Features

On/Off

The display is on when the telephone is on and off when the telephone is off.

Note: You may not have all of the Display Features listed below.

Normal Mode

In the normal mode, the display shows call information for the current active call appearance:

You may have as many as 10 call appearances. Beginning with the first button in the upper left corner of your faceplate and going down, the display identifies the first 5 buttons as a through e; the 5 buttons in the second column are identified as f through j. When the display shows [ a= ], it represents call information for the first call appearance. The next button down would be shown as [ b= ], and so on, continuing through [ j= ] if all 10 of these buttons are used for call appearances.

When you dial an extension, that number is shown and then replaced by the called party’s name and extension.

33

Page 37
Image 37
AT&T 7407 manual Display Features, Transfer, On/Off, Normal Mode