Common Systems Connection Standards | AT&T Services, Inc |
Date: August 31, 2007 |
Documentation must be provided in both PDF and HTML format on a CD that is fully indexed and fully searchable.
7.2Hard Copy Documentation
Documentation must be furnished in paper copy on request.
7.3Craft Interface Instructions
Documents must provide step by step instructions for each procedure using Craft GUI, EMS GUI, and TL1 (preferred) or equivalent commands.
Note: Items 7.4 and 7.5 Extend the testing procedure in
7.4Installation Guide: installation, provisioning, and testing of the network element
Vendor must test and validate that a new user can successfully install, provision, and test the network element by following the “Installation Guide”.
7.5Installation Guide: Creation, provisioning, and testing of a
Vendor must test and validate that a new user can successfully create, provision, and test a
7.6Alarm/Trouble Shooting Guide
Vendor must test and validate that a new user can use the Alarm or Trouble Shooting guide to successfully identify and clear alarms
7.7Personnel Injury and Equipment Damage Warnings
Documentation must keep the user aware of personnel injury and equipment damage by using the appropriate warnings, dangers, or cautions preceding procedures and incorporating the appropriate steps within the procedures.
7.8Reference Guide
Documentation must include a “Reference” guide that describes each component of the NE in detail
Example: Photographs or detailed drawings of the faceplates of each
Copyright ©2004 – 2006, AT&T Knowledge Ventures
All rights reserved
Page 22
