Select Ringing Pattern

You can select one of eight different ringing patterns for incoming calls. When there are several users in the same seating area, you can select a distinct ring- ing pattern so you can recognize when your voice terminal is ringing.

To select a ringing pattern, do the following:

1.While on-hook, press Shift , and then press Hold .

The current ringing pattern rings repeatedly.

The Shift lamp flashes.

The display shows the current ringing pattern number:

SELECT RING PATTERN: 3

2.Press Hold repeatedly to step through the rest of the ringing patterns.

3.When you hear the ringing pattern you want to use, press Shift .

You hear two beeps which indicates that the change was accepted.

Self-Test

To test the lamps on your voice terminal, do the following:

1.Press and hold Test .

The lamps on the left side go on followed by the lamps on the right side.

2.Release Test to end the test.

All the lamps go off, except for the Test lamp, which stays green for a few seconds.

32Issue 1 March 1996

Page 32
Image 32
AT&T 8410 manual Select Ringing Pattern, Self-Test