AT&T 8410 manual Bridging

To use the Automatic Callback feature, do the following:

1.After you hear a ringback tone or a busy tone, do one of the following:

a.Press Menu , and then press AutCB.

b.Press Auto Callback .

■You hear a confirmation tone.

2.Go on-hook.

■When the called telephone becomes available again, your tele- phone rings with priority ringing (a 3-burst ringback).

3.Go off-hook.

■You hear a ringback tone and the call is placed to the number you originally called.

If you decide that you want to cancel the Automatic Callback request, do one of the following:

1.While on-hook, do one of the following:

a.Press Menu , and then press AutCB.

b.Press Auto Callback .

2.Go off-hook and dial the Automatic Callback deactivation feature access code _____.

Bridging

You may have a “bridged” call appearance for someone else’s voice terminal assigned to your voice terminal. When you press this call appearance, it oper- ates as if you were at that person’s voice terminal. You can use this bridged call appearance to answer calls, make calls, or bridge on to an existing call.

10Issue 1 March 1996