Answering System Feature Setup | AT&T 900 MHz instruction

FEATURE SETUP

Answering System Feature Setup

	Stop recording;
	Exit Answering
	System Feature
	Setup
Delete selected
announcement
Scroll through
screen options	Scroll through
	Scroll through
Record/review	screen options
outgoing
announcement	Set/review
	answering
Use with other	system features
Use with other
buttons to
change settings
	Set/review day
	and time

At the base, you can set up one feature at a time, or you can set up a feature, and then move on to set up another feature. The system provides audible prompts as you set up Answering System features.

1Make sure the answering system is on, and press *(CHANGE) on the base. The Message Window displays CH.

2Press 9(SETUP) to reach the feature you want to set (the current feature will be announced by the system).

3Press 4(REPEAT) or 6(SKIP) to scroll through the options for that feature.

4Press 9(SETUP) again when the desired choice is displayed to save your selection and move to the next feature.

5To exit Answering System Feature Setup at any time, press Xor x.

10

Image 11

AT&T 900 MHz user manual Answering System Feature Setup

Contents

USER’S Manual Advanced American Telephones. All rights reserved Contents About Home and Local Area Codes About Caller ID with Call Waiting Before You Install Installation Install the handset battery Table/Desk and Wall Installation Connect the telephone line cord Softkeys Feature SetupMessage Window Display for Feature Setup Handset Ringer Telephone Feature SetupDial Mode Handset Ringer Off / Battery Save Call List Options Caller ID Feature SetupProgram Home and Local Area Codes Caller ID with Call Waiting Answering System Feature Setup Audible Message Alert Select Your AnnouncementRing Select / Toll Saver Change Priority Calling Code Change Remote Access CodePriority Call Signal Record Your Announcement from the Base Review Feature Settings Set the Clock Delete an Announcement Caller Specific Outgoing Announcement Feature Setup Talking Caller ID Feature Setup Announcements Outgoing Local Review ADD Enter Number Done Menu Call ID DIR Directory MEM ANS SYS Delete Done Preview a Handset VolumeMake Answer, or End a Call Flash Mute Telephone OperationRedial Temporary Tone Record a Phone Conversation HoldIntercom Headset Jack Changing Channels AT the Base Speaker Base Ringer Volume Handset Locator Page/Intercom Store a Number in Memory Telephone MEMORY/DIRECTORY Replace a Stored Number Store a Pause in a Memory NumberStore a Name with a Memory Number View Memory Numbers Store a Number and Name from Call History Edit Memory Numbers Delete Memory Numbers Dial a Memory Number from the Base Priority Ring NumbersDial a Memory Number from the Handset Announcement Play/Silent Audible IndicatorsAbout Mailboxes Record a Memo Answering CallsCall Screening/Intercept Announcement Bypass Function Button Listen To, Save & Delete Messages CL ↔ AO Message Window Display From a Touch Tone Phone Call ScreeningConnect with the Answering System From the Cordless Handset Function Command Remote Access Commands End remote access call Voice Help Menu Audible Signals Memory Match Call WaitingIncoming Call History Display Dial Review Call History Delete a Specific Call Record Caller ID OperationDelete Call Records from Call History Delete All Call Records Caller ID Display Messages Operating Range Batteries Battery LifeCharge the Handset Battery Pack Batteries Replace the Handset Battery Pack To re-initialize the handset and base Case of DifficultyIf the phone does not work at all, check these items first If you have no dial tone If the caller’s name or phone number is not displayed If you hear noise or interference when using the phoneIf the phone does not ring when you receive a call If you have difficulty hearing messages If speakerphone conversation sounds distortedIf messages are incomplete If your outgoing announcement isn’t clear If CL appears in the Message Window Answering System Remote Commands Remote Command Press