Operating Range | AT&T 900 MHz specs

OPERATING RANGE

This cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and base can communicate over only a certain distance — which can vary with the locations of the base and handset, the weather, and the construction of your home or office. For best performance, keep the base antenna fully upright.

If you receive a call while you are out of range, the handset might not ring — or if it does ring, the call might not connect when you press P. Move closer to the base, then press Pto answer the call.

If you move out of range during a phone conversation, you might hear noise or interference. To improve reception, move closer to the base.

If you move out of range without pressing P, your phone will be left “off the hook.” To hang up properly, walk back into range, periodically pressing P.

42

Image 43

AT&T 900 MHz user manual Operating Range

Contents

USER’S Manual Advanced American Telephones. All rights reserved Contents About Home and Local Area Codes About Caller ID with Call Waiting Before You Install Installation Install the handset battery Table/Desk and Wall Installation Connect the telephone line cord Message Window Display for Feature Setup Feature SetupSoftkeys Handset Ringer Telephone Feature SetupDial Mode Handset Ringer Off / Battery Save Call List Options Caller ID Feature SetupProgram Home and Local Area Codes Caller ID with Call Waiting Answering System Feature Setup Ring Select / Toll Saver Select Your AnnouncementAudible Message Alert Priority Call Signal Change Remote Access CodeChange Priority Calling Code Record Your Announcement from the Base Review Feature Settings Set the Clock Delete an Announcement Caller Specific Outgoing Announcement Feature Setup Talking Caller ID Feature Setup Announcements Outgoing Local Review ADD Enter Number Done Menu Call ID DIR Directory MEM ANS SYS Delete Done Preview a Handset VolumeMake Answer, or End a Call Flash Mute Telephone OperationRedial Temporary Tone Intercom HoldRecord a Phone Conversation Headset Jack Changing Channels AT the Base Speaker Base Ringer Volume Handset Locator Page/Intercom Store a Number in Memory Telephone MEMORY/DIRECTORY Store a Name with a Memory Number Store a Pause in a Memory NumberReplace a Stored Number View Memory Numbers Store a Number and Name from Call History Edit Memory Numbers Delete Memory Numbers Dial a Memory Number from the Handset Priority Ring NumbersDial a Memory Number from the Base About Mailboxes Audible IndicatorsAnnouncement Play/Silent Record a Memo Answering CallsCall Screening/Intercept Announcement Bypass Function Button Listen To, Save & Delete Messages CL ↔ AO Message Window Display From a Touch Tone Phone Call ScreeningConnect with the Answering System From the Cordless Handset Function Command Remote Access Commands End remote access call Voice Help Menu Audible Signals Incoming Call History Call WaitingMemory Match Display Dial Review Call History Delete Call Records from Call History Caller ID OperationDelete a Specific Call Record Delete All Call Records Caller ID Display Messages Operating Range Charge the Handset Battery Pack Battery LifeBatteries Batteries Replace the Handset Battery Pack To re-initialize the handset and base Case of DifficultyIf the phone does not work at all, check these items first If you have no dial tone If the phone does not ring when you receive a call If you hear noise or interference when using the phoneIf the caller’s name or phone number is not displayed If messages are incomplete If speakerphone conversation sounds distortedIf you have difficulty hearing messages If your outgoing announcement isn’t clear If CL appears in the Message Window Answering System Remote Commands Remote Command Press