AT&T ATT-EP5962 Battery & charger installation, Installation of Battery Pack in Handset

91-000302-050-000_EP5962Englishmanual_Sep.02,2005.qxd 2/13/1950 7:21 PM Page 8

Getting Started

Battery & charger installation

Installation of Battery Pack in Handset

Follow the steps below:

1.Remove the battery compartment cover by pressing on the indentation and sliding downward. Place the new battery pack in the handset with the positive and negative poles aligned in the battery compartment.

2.Replace the battery cover by sliding it upwards.

3.Place the handset in its charger, and allow it to charge for at least 10-12 hours. After ini- tial charge, a maintenance charge of 8 hours should be sufficient.

Insert supplied battery.

Charging of the Handset Battery Pack

Caution: Use only supplied rechargeable battery (model

102)or AT&T replacement bat- tery model 103.

The cordless handset is powered by a rechargeable battery pack. It charges automatically whenever the handset is in its charger. You should charge the battery pack for at least 10-12 hours when you first receive your phone. Average talk time on a fully charged battery is about 8 hours depending on environmental conditions. The battery charge will last for about 4.5 days if you don't use the phone.

You will know the battery pack needs charging when :

•The low battery message is displayed.

OR

•The handset seems completely dead, the LCD is completely clear and does not respond when you press the keys.

	Plug power cord into jack
LOW	on underside of charger,
	then plug A.C. plug into
BATTERY
	electrical outlet.

DID YOU KNOW?

An optional spare battery pack can be kept charged in the base for quick replacement when a handset battery becomes depleted and for power failure operation (see page 44).

Place handset in charger for 12 hours before first use.

8