AT&T ATT1856 user manual Changing feature options, Feature options

1.	TAS/SETUP
	Press and hold
	for one second to
	enter feature menu.
2.	TAS/SETUP
	until desired feature
	is heard (see list at
	right).

Answering system operation

Changing feature options

When the answering system is on, you can customize how the system operates. Press and hold TAS/SETUP to begin, then press repeatedly to hear each feature. Press SKIP or REPEAT to change the setting of any fea- ture. Or press PLAY/STOP to exit.

Feature options	(Default settings underlined).
System announces:	Feature description:
“Selected announcement is,”	A: Callers can leave messages.
current setting, then "To select	Announce only: Callers cannot
a different announcement,	leave messages (page 23).
press SKIP or REPEAT ."
Options: A/Announce only

3. SKIP or

REPEAT

until desired selec- tion is heard.

4.	TAS/SETUP
to	set selection

“Number of rings is,” current setting, then "To change the number of rings, or select toll saver, press SKIP or REPEAT." Options: 2-7/24/46 (default 4)

Choose number of rings before the system answers a call (2 to 7). There are two toll saver options: 2/4 (the system answers after two rings if there are new messages/ memos; otherwise, it answers after four rings) and 4/6 (the system answers after four rings if there are new messages/memos; other- wise, it answers after six rings).

and move to next

menu option.

- OR -

PLAY/STOP

to set selection and exit menu.

“Message alert is,” current set-	When on, the telephone beeps
ting, then "To change, press	every 15 seconds when you have
SKIP or REPEAT." Options:	new messages.
On/Off
"Remote access code is," cur-	Follow the prompts to enter a
rent setting, then "To select	three-digit number (must be
the first digit, press SKIP or	between 500 and 999).
REPEAT, then press SETUP."
"Select the second digit, then
press SETUP."
"Select the third digit, then
press SETUP."
Options: 500-999/(default
500)

24