Getting started
Telephone base installation
Install the telephone as shown below. Choose a location where the telephone is
not exposed to excessive heat, cold, dust or moisture.
1.Plug one end of the telephone line cord into the telephone jack at the back of the telephone.
2. Plug the small end of the |
|
power adapter into the power | 5 |
jack at the back of the tele- |
phone.
4 
3.Route cords through slots.
4.Plug the other end of the tele- phone line cord into a telephone jack.
5.Plug the large end of the power adapter into an electri- cal outlet not controlled by a wall switch.
3 
2
1 |
NOTES:
1.Use only the power adapter supplied with this product or equivalent. To order a replacement power adapter, visit our website at www.telephones.att.com, or call 1 (800)
2.Be sure to use an electrical outlet not controlled by a wall switch.
3.This power adapter is intended to be correctly oriented in a vertical or floor mount position.
5
