MSG#
AO
AO (announce only) is displayed and flashing when announce only is actived. AO stops flash- ing after an announce- ment is recorded.
1.
TAS/SETUP Press and hold for one second to enter feature menu.
"Selected announcement is A. To select
adifferent announcement, press SKIP or REPEAT."
2.
SKIP or
REPEAT
"Announce only"
3.
PLAY/STOP to save selection and exit menu.
Answering system operation
Announce only mode
In announce only mode, callers can hear an announcement but cannot leave messages. This option is useful, for example, to notify callers that you will be away for an extended period and request that they call back after a certain date.
To turn announce only on or off
Press and hold TAS/SETUP until you hear "Selected announcement is A. To select a different announce-
ment, press SKIP or REPEAT." Then press 
SKIP or 
REPEAT until you hear the option you want:
•A: Callers hear current outgoing announcement and can leave messages.
•Announce only: Callers hear current outgoing announcement and cannot leave messages.
Press PLAY/STOP to save your selection and exit, or press TAS/SETUP again to change other features (pages
To record your outgoing announcement
After turning on the announce only feature, see page 22 to record your announcement.
If you do not record an announcement, incoming calls will be answered after 10 rings, but callers will hear "No announcement" and beep twice, then “The machine will now hang up” after about 15 seconds, and you will not be able to leave a mes- sage.
23
