Telephone operation
Options while on calls
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to
send
1.During a call, press TONE
.
2.Use the dialing keys to enter the desired number. The telephone sends
3.The telephone automatically returns to pulse dialing after you end the call.
Blind transfer
While on an outside call, you can transfer it to a specific handset or any handset. This feature is not available for model CL82101 unless you purchase an accessory handset (AT&T model CL80101).
To transfer an outside call directly without notifying the desired handset:
1.During the call, press MENU/SELECT.
2.Press MENU/SELECT to choose >Transfer.
•If you have a
The other handset rings and its screen shows Transfer from other handset.
•If you have more than 2 handsets, your screen shows TRANSFER TO: Use the dialing keys to enter a specific
handset number 
and 
and # for all handsets), or press qCID or pDIR to scroll to the desired handset and press MENU/SELECT. The outside call is put on hold and your handset screen shows Transferring call... or Transferring call to all...
Phone 0:00:12
10/15 10:01AM
>Transfer Intercom
p q
TRANSFER TO: >Handset 2
p q
The other handset(s) rings and shows Transfer from HANDSET X
(HANDSET represents the handset name, X represents the handset number).
3. To answer the call on the destination handset, press PHONE/FLASH or 
/SPEAKER� . The original handset shows Call transferred and goes to
idle mode.
NOTES:
•To cancel the transfer and return to the external call before the blind transfer call is answered, press OFF/CANCEL on your handset.
•If the other handset does not answer the transfer within 30 seconds, the transfer ends and the original handset rings while showing No response to transfer. If it does not pick up within 30 seconds, the handset returns to idle mode and the outside call ends.
24
