Answering system
Answering system settings
Message alert tone
When the message alert tone is set to On, and there is at least one new message, the telephone base beeps every 10 seconds. Unless you change it, the message alert tone is set to off.
There is no audible alert at the handset.
To change the setting:
1.When the handset is in idle mode, press MENU/SELECT to enter the main menu.
2.Press qCID or pDIR to scroll to >Answering sys, then
| press MENU/SELECT. | Remote code | |
| >Msg alert tone | ||
3. | Press qCID or pDIR to scroll to >Ans sys setup, then | ||
p | |||
| press MENU/SELECT. | ||
| q | ||
|
| ||
4. | Press qCID or pDIR to scroll to >Msg alert tone, then |
| |
| |||
| press MENU/SELECT. | MSG ALERT TONE | |
5. | Press qCID or pDIR to choose >On or >Off. | >On | |
6. | Press MENU/SELECT to save the setting. You hear a | p | |
q | |||
|
| ||
| confirmation tone. Press OFF/CANCEL to cancel. |
| |
|
|
NOTES:
• The message alert tone beeps only if all the conditions below are met: - Answering system is on.
- Message alert tone setting is on. - There are new messages.
• To temporarily turn off the message alert tone, see page 52.
Message recording time |
| |
You can set the recording time allowed for incoming |
| |
Msg alert tone | ||
messages. The message length is three minutes by default. | ||
>Recording time | ||
To change the setting: | ||
p | ||
| q | |
1. When the handset is in idle mode, press MENU/SELECT to |
| |
enter the main menu. |
| |
RECORDING TIME | ||
2. Press qCID or pDIR to scroll to >Answering sys, then | ||
>3 minutes | ||
press MENU/SELECT. | ||
p |
q
3.Press qCID or pDIR to scroll to >Ans sys setup, then press MENU/SELECT.
4.Press qCID or pDIR to scroll to >Recording time, then press MENU/SELECT.
5.Press qCID or pDIR to choose >3 minutes, >2 minutes, or >1 minute, then press MENU/SELECT to save the setting. You hear a confirmation tone. Press
OFF/CANCEL to cancel.
49
