AT&T Door Phone Controller operation manual Options Mode Option Listen Press Default Verify For

Table 5-1. AT&T Door Phone Controller Option Selection Information

Options	Mode Option/				Listen			Press		Listen	Default
		Verify		Press	For					For
Delay Before Door	To	Select	Option	00	Single	000 to 255 for 0 to 255 seconds				Double	30 sec.
Ajar Call-back					Beep	of delay after strike plate				Beep
	To	Verify		01		release stops until AT&T Door
						Phone Controller calls back to
						indicate that door is ajar
Ring/Chime	To	Select	Option	10	Single	24 (for 2 sec. on 4 sec. off				Double	2 sec./
Cadence					Beep	cadence)			o r	Beep	4 sec.
	To	Verify		11		15 (for 1 sec. on 5 sec. off
						cadence)
Ring/Chime	To Select Option			20	Single	00 to 99 (0 to 99 second(s)				Double	30 sec.
Duration					Beep	ring/chime)				Beep
	To	Verify		21
Door Unlock Code	To	Select	Option	30	Single	4 digits (first digit must be				Double	6736
					Beep	0,3,4,5,6,7 or 8;				Beep	“OPEN”
	To	Verify		31		remaining digits can be set from
						0 to 9)
Door Unlock	To	Select	Option	40	Single	00 to 99 (door lock active time				Double	4 sec.
Duration					Beep	in sec.)				Beep
	To	Verify		4 1
Enable Door Code	To	Select	Option	50	Single	1	Enable	door	code	Double	1
					Beep	0	Disable	door	code	Beep	(Enabled)
	To	Verify		51
Door Ajar Mode	To	Select	Option	50	Single	2	For callback after strike			Double	2
					Beep		plate release only			Beep
	To	Verify		51		3	For callback		anytime
							door is opened
Forced Disconnect	To	Select	Option	60	Single	10 to 255 (unit disconnects in				Double	120 sec.
					Beep	10 to 255 sec.)				Beep
Time-Out	To	Verify		6 1
Reset Options to	To	Select	Option	7 0	Single	## (to restore factory default				Double	N/A
					Beep		conditions)			Beep
Factory Defaults	To	Verify		71
Phone Number	To	Select	Option	80	Single	0 to 20 numerical digits and				Double	#
					Beep	❊ ( ❊ = 2 second pause) #				Beep
Storage Memory 1
	To	Verify		81		terminates		entry
Phone Number	To	Select	Option	90	Single	0 to 20 numerical digits and				Double	#
					Beep	❊ ( ❊ = 2 second pause) #				Beep
Storage Memory 2
	To	Verify		91		terminates		entry

Installation - Dedicated Station Port 5-7