Sending Messages
_______________________________________________
_______________________________________________
AUDIX Voice Power voices back the name or extension number of the list’s owner. (The name is used if it has been recorded; otherwise the extension number will be repeated.)
4. Enter the list ID followed by
#
.
AUDIX Voice Power repeats the list ID and tells you the number of entries. If the list is not found, AUDIX Voice Power will ask you to start over.
If the list ID is not what you intended, press
Dto delete the entry and go to step 2.
*
5.You can address to additional lists by repeating steps 2 through 4.
If you wish to address this message to other subscribers not in the list, enter each extension or name followed by # .
You can review the list at any time by pressing
1. See Reviewing the List of Recipients.
*
6. After the last list (or extension or name) has been
entered, press | * |
| # | to signal the end of |
addressing. |
|
|
|
|
"Delivery scheduled" confirms that your message has been sent.
NOTE: AUDIX Voice Power eliminates any duplicates that may have occurred during the addressing process.
25
