Sending Messages
_______________________________________________
_______________________________________________
Name Addressing
The Name Addressing feature of AUDIX Voice Power allows callers and subscribers to enter the name of the person they are trying to reach instead of the extension number.
The name is entered using the letters which correspond to touch tones on the dialpad.
The name you use for a particular subscriber is determined by the system administrator but is usually the subscriber’s last name.
When dialing a name, use 7 (PQRS) to represent "Q" and use 9 (WXYZ) to represent "Z." You need not dial the complete name, but you should dial at least three or four letters.
If more than one name is found that matches the letters you have dialed, AUDIX Voice Power will recite the names found and ask you to select the appropriate name. AUDIX Voice Power presents names in groups of 5. To hear more names press # .
If you press an incorrect letter or digit, you can cancel the
input and start over by pressing * 
D at any time.
23
