Telephone settings
menu setup
Tone/pulse
This telephone comes factory set for touch tone dialing. If you only have pulse dial (rotary) service, you need to change this setting to PULSE by following the steps below:
1.Press OPTION repeatedly until the screen displays SET TONE/PULSE.
2.Press 
or 
to select the dialing mode (TONE or PULSE).
3.Press OPTION to save your selection and return to idle mode.
SET TONE/PULSE
TONE
Press CLEAR to exit without saving your selection and return to idle mode.
NOTE: If you have pulse dial (rotary) service, you can temporarily switch to touch tone dialing during a call by pressing TONE 
(page 21). After hanging up or pressing FLASH, the telephone automatically returns to its original dial mode.
19
