Configure a Polycom RMX Series Video Conferencing Bridge Platform
Configure a Polycom RMX Series Video Conferencing Bridge Platform
This section describes how to configure a Polycom RMX series video conferencing bridge platform for use with an Avaya server.
Checklist
When setting up these systems, you will need to know the following information:
●the IP codec sets you want to use
●the IP network regions you want use
●the IP address of the IP board for the RMX system
●the IP address of the CLAN
Note:
Make sure you have the RMX Installation and Configuration guide available when you configure the RMX.
Configuration Procedures
To configure a Polycom RMX video conferencing bridge platform, you must perform the following steps:
1.Add an entry in the IP Node Names for the RMX system.
2.Add a
3.Add a signaling group for the RMX system.
4.Add members to the
5.Create a route pattern for the trunk group.
6.Configure the RMX system.
Issue 3 January 2008 65
