Setting Up Video Endpoints

Figure 4: Example of Page 3 of the IP Network Region Form

7.Set codec set to the codec set you defined in Procedure 2.

8.Set Video Norm to the amount of bandwidth that you want to allocate for the normal video pool to each IP network region.

9.Set Video Prio to the amount of bandwidth that you want to allocate for the priority video pool to each IP network region.

10.Set Video Shr. Specify whether the normal video pool can be shared with the audio pool for each link between IP network regions (y or n).

11.Repeat Steps 1 through 10 for each IP network region that will be used for video in this system.

52 Avaya Video Telephony Solution Networking Guide

Page 52
Image 52
Avaya 16-601423 manual Example of Page 3 of the IP Network Region Form