Configure Ad-hoc Video Conferencing for a Polycom MGC Video Conferencing Bridge Platform
Issue 3 January 2008 91
Figure 19: Example of Page 2 of the IP Network Region Form
5. Set Security Procedures 1 to any-auth.
6. Go to page 3 of the form.
7. Set codec set to the appropriate codec set you defined.
8. Set Video Norm to the amount of bandwidth that you want to allocate for the normal video
pool to each IP network region.
9. Set Video Prio to the amount of bandwidth that you want to allocate for the priority video
pool to each IP network region.
10. Set Video Shr. Specify whether the normal video pool can be shared with the audio pool fo r
each link between IP network regions (y or n).
11.Repeat Steps 1 through 10 for each IP network region that will be used for video in this
system.