Configure Polycom VSX/HDX Series Video Conferencing Systems and V500/V700 Video Calling Systems
Issue 3 January 2008 57
Configure Polycom VSX/HDX Series Video Conferencing Systems and V500/V700 Video Calling Systems
Use this procedure to configure Polycom VSX/HDX series video conferencing systems and
V500 and V700 video calling systems.
Checklist
When setting up these systems, you will need to know the following information:
maximum number of VSX/HDX, V500, and V700 systems on your network
PIN for each VSX/V500/V700 system. The PIN can consist of a maximum of eight numeric
characters and is defined by the System Administrator.
the key code that combines the Avaya option with any other Polycom options.
whether the VSX/HDX system has the multipoint option or IMCU option. If so, you must
combine the Polycom Software License for this capability with the “Avaya Option” Polycom
Software License to create a single Key Code to input into the unit.
IP address of the voice system
the IP codec sets you want to use
the IP network regions you want use
Configuration Procedures
To configure Polycom VSX/HDX series video conferencing systems and V500/V700 video
calling systems, you must perform the following steps:
1. Determine the maximum number of video-capable H.323 stations your voice system
supports.
2. Configure the Class of Service if you want to use priority video calling.
3. Add a new station for the Polycom system.
4. Configure the Polycom system.