Configure an Avaya Meeting Exchange 5.0.1 S6800 Bridge
Issue 3 January 2008 119
Figure 38: Example of Page 2 of the Optional Features Form
2. Perform the following steps to configure COS for the video ad-hoc-enabled users:
a. Use the change cos command to access the Class of Service form.
b. Go to page 2 of the form.
c. Set Ad-hoc Video Conferencing for the appropriate COS levels.
3. Perform the following steps to configure a video bridge on the Avaya Communication
Manager system:
a. Use the add video-bridge xx command (where xx is the bridge number between 1 to
40) to access the Video Bridge form.
b. In Name, enter the name for this video bridge (for example, Ad Hoc Video Bridge -
Meeting Exchange).
c. Set Max Ports to the maximum number of Ad-hoc conferencing ports you want to assign
to this bridge. (The minimum you can enter is 3.) This is equivalent to the number of ports
that are available for Ad-hoc use on the associated RMX based on a needed bit rate for
video.