Panasonic KX-FLM651 operating instructions Feature/Code Selection, Tone

8. Programmable Features

Feature/Code	Selection
Sending a fax at a specific	This feature allows you to take advantage of low-cost calling hours
time	offered by your telephone company. This feature can be set up to 24
{#}{4}{1}{2}	hours in advance of the desired time.
	{0} “OFF” (default)
	{1} “ON”
	To send a document:
	1. Insert the document into the auto document feeder.
	2. If necessary, press {RESOLUTION} repeatedly to select the
	desired resolution (page 30).
	3. Press {MENU}.
	4. Press {#}, then {4}{1}{2}.
	5. Press {1} to select “ON”.
	6. Press {SET}.
	7. Enter the fax number.
	L To enter an item using one-touch dial feature and navigator
	directory, see step 4, “4.3 Sending a fax using one-touch dial
	feature and navigator directory”, page 32. (When using
	navigator directory, you do not have to press {<} or {>} before
	pressing {A} or {B}.)
	8. Press {SET}.
	9. Enter the transmission start time.
	L Press {*} repeatedly to select “AM” or “PM”.
	10. Press {SET}.
	L To cancel after programming, press {STOP} then {SET}.
Setting the Error	This feature is available when the sending/receiving fax machines are
Correction Mode (ECM)	ECM compatible.
{#}{4}{1}{3}	{0} “OFF”: Deactivates this feature.
	{1} “ON” (default): If there is an error during fax transmission /
	reception, the fax machine will support the communication.
Setting the connecting	If you often have trouble when sending faxes, this feature allows you to
tone	hear connecting tones: fax tone, ring back tone and busy tone. You can
{#}{4}{1}{6}	use these tones to confirm the status of the other party’s machine.
	{0} “OFF”: Deactivates this feature.
	{1} “ON” (default): You will hear connecting tones.
	L If the ring back tone continues, the other party’s machine may not
	be a fax machine or may have run out of paper. Check with the
	other party.
	L The connecting tone volume cannot be adjusted.
Activating the Distinctive	{0} “OFF” (default)
Ring feature	{1} “ON”
{#}{4}{3}{0}	See page 39 for details.
Setting the ring pattern	{1} “A”
for fax (Distinctive Ring	{2} “B”
feature)	{3} “C”
{#}{4}{3}{1}	{4} “D”
	{5} “B-D”(default)
	See page 40 for details.

56