Panasonic KX-FLM651 operating instructions Copying

9. Help

Problem	Cause & Solution
The printing quality is	L If documents can be copied properly, the unit is working normally.
poor.	The other party may have sent a faint document or there may be
	something wrong with the other party’s machine. Ask them to send
	a clearer copy of the document or to check their fax machine.
	L Some paper has instructions recommending which side to print on.
	Try turning the paper over.
	L You may have used paper with a cotton and/or fiber content that is
	over 20%, such as letterhead or resume paper.
	L The remaining toner is low. Replace the toner cartridge (page 68).
	L To check the drum life and quality, please print the printer test list
	(page 77). If printing quality is still poor, replace the toner cartridge
	and drum unit.
	L The toner save mode is ON (feature #482 on page 54).
	L The glass or rollers are dirty with correction fluid, etc. Clean them
	(page 75). Please do not insert a document before correction fluid
	has dried completely.
I cannot receive	L Feature #442 is activated and the received fax documents are
documents even though	automatically transferred to the computer. View the received
paper is installed.	documents using the computer (page 50).
When an extension	L You must set remote fax activation to ON (feature #434 on page 57)
telephone is connected, I	beforehand.
cannot receive	L Press {*}{#}{9} firmly.
documents by pressing	L You may have changed the remote fax activation code from
{*}{#}{9}.	{*}{#}{9} (default setting). Verify the remote fax activation code
	(feature #434 on page 57).
	L The memory is full of received documents due to a lack of
	recording paper or a recording paper jam. Install paper (page 17)
	or clear the jammed paper (page 71).
The other party complains	L The memory is full of received documents due to a lack of
that they cannot send a	recording paper or a recording paper jam. Install paper (page 17)
document.	or clear the jammed paper (page 71).
	L The unit is not in FAX ONLY mode. Press {AUTO ANSWER}
	repeatedly to turn ON the {AUTO ANSWER} light.
I cannot select the desired	L If you want to set FAX ONLY mode:
receiving mode.	– press {AUTO ANSWER} repeatedly to turn ON the {AUTO
	ANSWER} light.
	L If you want to set TEL mode:
	– press {AUTO ANSWER} repeatedly to turn OFF the {AUTO
	ANSWER} light.
	L The Distinctive Ring of feature #430 is activated (page 39).
9.3.5 Copying
Problem	Cause & Solution
The unit will not make a	L You cannot make a copy during programming. Make the copy after
copy.	programming.
	L The document was not fed into the unit properly. Re-insert the
	document.
	L Recording paper is not installed or the unit has run out of paper.
	Install paper (page 17).

64For assistance, please visit http://www.panasonic.com/consumersupport