![](/images/new-backgrounds/1184915/18491561x1.webp)
3. Telephone
2Press {A} or {B} repeatedly to display the desired item.
3Press {<}.
LTo cancel erasing, press {STOP}.
4Press {SET}.
LTo erase other items, repeat steps 2 to 4.
5Press {STOP} to exit.
3.5Storing caller information into the one- touch dial feature and navigator directory
LKeep the front cover page open for button locations.
Important:
LThis feature is not available in the following cases.
–The telephone number includes data other than numbers (i.e., * or #).
–The caller information does not include a telephone number.
1Press {CALLER ID SEARCH}.
2Press {A} or {B} repeatedly to display the desired item.
3Press {DIRECTORY PROGRAM}.
4Select the station key or navigator directory.
For stations
1.Press the desired station key.
2.Press {A} or {B} repeatedly to select “DIAL MODE”.
3.Press {SET}.
4.Press {SET}.
For stations
1.Press the desired station key.
2.Press {SET}.
For stations
1.Press {LOWER}, then press the desired station key.
2.Press {SET}.
For navigator directory:
1.Press {<} or {>}.
2.Press {SET}.
5Press {SET}.
Note:
L You can confirm the stored items by printing the telephone number list (page 77).
LThe unit can only store a name of up to 16 characters long.
LTo edit a name or number, see page 26. L If caller information does not include the
caller’s name, enter the name manually. See the instructions on page 25.
L If you assign an item to a station key which already contains an item, the previous item will be replaced.
L Station 1 to 3 can be used alternatively as broadcast keys (page 32).
29