Setting Up Video Endpoints
62 Avaya Video Telephony Solution Networking Guide
7. If the VSX system has the multipoint option or IMCU option, perform the following steps:
a. Use the add station command to add a second station for the Polycom system.
b. Set Type to H.323.
c. Set Security Code to the “pin” you will administer for the VSX/HDX. Make sure the
security code is the same as the previous station. All three stations must have the same
security code.
d. Set IP Video to y.
e. Go to page 2 of the form.
Figure 11:Example of Page 2 of the Station Form
f. Set Direct IP-IP Audio Connections to y.
g. Set IP Audio Hairpinning to y.
h. If you want this station to be able to make priority video calls, make sure you select a
COS level that has Priority Video Calling enabled. (See Procedure 4.)
i. Repeat Steps a through h to create the third consecutive station.
Note:
Note: You can have up to six stations.