ATEN Technology CM1164 Front View, Components

CM1164 User Manual

Components

Front View

14

		2	3	2
						5		6	7	8	9
	No.	Component					Description
1		LED Status Panel		This panel contains LED icons that light to indicate mode
				and port status. The Mode and Port Selection Pushbuttons
				each have three corresponding LED icons that represent
				audio, KVM, and USB Link status. See LED Display,
				page 16, for full details.
2		Port Selection		Š Press the Port Selection Pushbuttons to manually
		Pushbuttons			switch ports. See LED Display, page 16, for full details.
				Š Press and hold Port Selection Pushbuttons 1 and 2
					simultaneously for 2 seconds to start Auto Scan Mode.
					See Auto Scanning, page 30, for full details.
				Š Press and hold Port Selection Pushbuttons 3 and 4
					simultaneously for 2 seconds to execute a KVM reset.
					See KVM Reset, page 26 for full details.
3		Mode Selection		This pushbutton allows you to cycle through the three
		Pushbutton		modes of focus – KVM, audio, and USB Link.
4		OSD (Esc) button		Press this to invoke the on-screen display (OSD) menu.
				When the OSD menu is enabled, press the OSD button to
				go back to the previous menu/submenu.
5		Select button		Press this to select an option in the OSD menu.
6		Direction /		Use these buttons to switch between Function modes (Fn1
		Function buttons		to Fn4), and to cycle through the OSD menu/selection.
				See IR Remote Control, page 8 for details.
7		Console Audio		Your speakers and microphone plug in here.
		Ports
8		USB 2.0		USB 2.0 peripherals (printers, scanners, etc.) plug into this
		Peripheral Port		port.
9		IR Receiver		This receives signals from the IR remote control.

6