Chapter 5. OSD Operation
Display Modes
Click the Display Mode you want to use to go to a page where you can configure which computer(s)/source device(s) correspond to each channel, and which channels are shown in the display screen. See Channel ID, page 21 for information on how channels work.
Quad
Quad Mode lets you show all four computers/video sources on the display at one time. Check the port number that corresponds to each channel and click save.
Picture in Picture (Dual / Triple / Quad)
The Picture in Picture (PiP) Mode lets you show two (Dual), three (Triple) or four (Quad) computers/video sources on the display at one time.
The PiP Quad Mode is shown below.
(Continues on next page.)
37