CM1164 User Manual

Upgrade Succeeded

After the upgrade has completed, a screen appears to inform you that the procedure was successful:

Click Finish to close the Firmware Upgrade Utility.

After a successful completion, the CM1164 exits Firmware Upgrade Mode, and resets itself.

Upgrade Failed

If the Upgrade Succeeded screen does not appear, it means that the upgrade failed to complete successfully, in which case you should do the following:

1.Power off the CM1164 by removing the power cord.

2.Invoke Firmware Upgrade Mode by holding down the front panel Mode Selection pushbutton (see Components, page 6) and power on the CM1164. The KVM LEDs flash orange together.

3.Do the firmware upgrade procedure again.

52