CM1164 User Manual

Display Modes

The CM1164 enables users to use various Display Modes so that the screen can show more than one computer/video source at one time. This feature is useful when requiring information from multiple computers/video sources conveniently.

When switching between ports, either via the front panel pushbuttons, remote control, and so on, the display is shown in Full Screen by default. This mode enables users to view the computer/video source with the KVM focus in maximum resolution, with the picture occupying the whole screen.

Note: The number shown on the top left corner of the each display is the Port ID. See page 15 for details.

Change the Display Mode using the IR remote control. See IR Remote Control, page 8 for details. Simply click the button of the Display Mode you want to use:

ŠThe Quad button refers to Quad View (see page 19).

ŠThe PiP2 button refers to Picture in Picture Dual Mode (see page 19).

ŠThe PiP3 button refers to Picture in Picture Triple Mode (see page 20).

ŠThe PiP4 button refer to Picture in Picture Quad Mode (see page 20).

If you switch between ports, the Display Mode reverts back to Full Screen.

18