ATEN Technology CM1164 IR Remote Control

CM1164 User Manual

IR Remote Control

1

2

3

4

5

No.	Component	Description
1	OSD button	Press this to turn on/turn off the OSD menu.
		When the OSD menu is enabled, press the OSD
		button to go back to the previous menu/submenu.
2	Fn1 / Fn2 / Fn3 / Fn4	Use these buttons to switch between Function modes
	Buttons and Select	(Fn1 to Fn4), and to cycle through the OSD menu/
	Button	selection.
		See FN Keys, page 23 for details on how to store
		function mode settings, which you can invoke for later
		use.
		The Fn1~Fn4 buttons are positioned to correspond to
		the up / down / left / right direction.
		Š When cycling through the menu options, press the
		Select button to go the submenu.
		Š If you want to change or adjust a selection/value,
		press the Select button then the Fn1 (up) / Fn2 (left)
		/ Fn3 (down) / Fn4 (right) buttons to go through all
		the selections/values. Press the Select button again
		to confirm a selection.
3	Display Mode buttons	Select the Display Mode you want to view. See Display
		Modes, page 18.
4	Port Selection Buttons	Press these buttons to switch ports (1~4).
	1~4
5	Station Selection	If the CM1164 is daisy chained to one or several units
	Buttons	(up to 4), press the button corresponding to the
		CM1164 device that you want to configure or operate.

8