(F5 Settings cont.)
Setting | Function |
RELEASE ALL PRIVATE | Releases all Ports that have been set to Private Mode (see Private |
| Mode, p. 17), so that they become accessible to all Consoles. |
|
|
SET LOGOUT TIMEOUT | If a Console that has accessed a computer isn’t used for the amount |
| of time set with this function, the Operator is automatically logged |
| out. A login is necessary before the Console can be used again. This |
| enables the other Console to gain access to the computers when the |
| original Console is no longer accessing them, but the Operator has |
| forgotten to relinquish access. To set the timeout value, key in a |
| number from 1 - 255 minutes, then press [Enter] If the number is 0 |
| [zero], this function is disabled. |
wF6 Set:
[F6] allows you to configure the OSD settings for the Console you are working at. To change a setting:
1.Double Click it; or move the highlight bar to it, then press [Enter]
2.Press [Esc] to activate it.
After you select an item, a submenu with further choices appears. To make a selection, either Double Click it; or move the Highlight Bar to it, then press [Enter]. An icon appears before the selected choice to indicate which one it is. The settings are explained in the table below:
Setting | Function |
OSD ACTIVATING | Selects which Hotkey activates the OSD function: [Ctrl] [Ctrl] (the |
HOTKEY | default) or [Scroll Lock] [Scroll Lock]. The Scroll Lock option is |
| provided in case the Ctrl key combination conflicts with programs |
| running on the computers. |
|
|
CHANNEL DISPLAY | Selects how the Port ID is displayed: the Port Number plus the |
MODE | Name (PN + NAME); the Port Number alone (PN); or the Name |
| alone (NAME). |
|
|
CHANNEL DISPLAY | Determines how long a Port ID displays for after a port change has |
DURATION | taken place. The choices are: User Defined - which lets you select |
| the amount of time that the Port ID displays for after a port change |
| has taken place (from 1 - 255 sec.); and Display Always On - which |
| displays the Port ID at all times. If you select User Defined, key in |
| the number of seconds, then press [Enter]. The default is 3 Seconds. |
|
|
16 |
