F2 SCAN:
Pressing [F2] initiates Quick View Scanning, in which the OSD cycles through all the ports that are currently selected for this with the QV feature (see F4 QV, below). It stays on each port for the amount of time set with the Scan Duration setting under the F6 SET function (see p. 22). When you want to stop at a particular location, press the [Spacebar] to stop scanning. When you want to stop at a particular location, press the [Spacebar] to stop scanning.
Note: 1. If the scanning stops on an empty port, or one where the system is attached but is powered Off, the monitor screen will be blank, and the mouse and keyboard will have no effect. After the Scan Duration time is up, the Scan function will move on to the next port.
2.As each system is accessed, an S appears in front of the Port ID display to indicate that it is being accessed under Quick Scan Mode.
19 |