F6 SET:
Pressing [F6] brings up the OSD configuration menu. To change a setting:
1.Move the highlight bar to the choice you want (an icon of a pointing finger indicates which choice is the currently selected one), then press [Enter].
2.On the submenu that appears, move the highlight bar to the choice you want and press [Enter].
An explanation of the choices is given in the table below:
Setting | Function |
CHANNEL DISPLAY | Selects how the Port ID is displayed: the Port Number plus |
MODE | the Name (PN + NAME); the Port Number alone (PN); or |
| the Name alone (NAME). |
|
|
CHANNEL DISPLAY | Determines how long a Port ID displays on the monitor after |
DURATION | a port change has taken place: 3 Seconds; or Always On. |
|
|
CHANNEL DISPLAY | Allows you to position where the Port ID appears on the |
POSITION | screen. Use the Arrow Keys, Pg Up, Pg Dn, Home, End, |
| and 5 (on the numeric keypad with Num Lock off), to |
| position the Port ID display, then press [Enter] to lock the |
| position and return to the SET submenu. |
|
|
SCAN DURATION | Determines how long the display dwells on each port as it |
| cycles through the selected ports in Auto Scan Mode. The |
| options are: 3, 5, 10, 15, 20, 30, 40, and 60 seconds. |
|
|
OSD ACTIVATING | Selects which Hotkey activates the OSD function: [Ctrl] |
HOTKEY | [Ctrl] or [Scroll Lock] [Scroll Lock]. The default is the Ctrl |
| key combination, but this may conflict with programs |
| running on the systems, in which case, the Scroll Lock |
| option should be used. |
|
|
(Table continues on next page)
22 |