F3 LIST:
This function lets you broaden or narrow the scope of which ports the OSD lists. On the submenu that appears, an icon of a pointing finger indicates the currently selected choice. To change a setting, move the highlight bar to the choice you want, then press [Enter]. An explanation of the settings is given in the table below:
Choice | Meaning |
ALL | Lists the Port ID numbers and Names (if names have been specified - |
| see F5, below), of all the ports on the installation. |
|
|
QVIEW | Lists only the ports that have been selected for Quick View scanning |
| (see F4, below). |
|
|
POWERED ON + | Lists only the ports that have been selected for Quick View scanning |
QVIEW | (see F4, below), and that have their attached computers Powered On. |
|
|
QVIEW + NAME | Lists only the ports that have been selected for Quick View scanning |
| (see F4, below), and have been assigned names (see F5, below). |
|
|
NAME | Lists only the ports that have been assigned names (see F5, below). |
|
|
POWERED ON | Lists only the ports that have their attached systems Powered On. |
|
|
Note: 1. You can access any port on any list by using the Navigation Keys then pressing [Enter].
2.If you select a port that does not have a computer attached to it, or if the attached system is powered Off, the OSD will still switch to it, and will not show an error.
20 |