KH1508i / KH1516i User Manual
F3 SET
This function allows the Administrator and each User to set up their own working environment. A separate profile for each is stored by the OSD and is activated according to the Username that is provided during Login.
To change a setting:
1.Move the highlight bar to it, then press [Enter].
2.After you select an item, a submenu with further choices appears. To make a selection, move the Highlight Bar to it, then press [Enter]. An icon appears before the selected choice to indicate which one it is. The settings are explained in the following table:
Setting | Function |
|
|
OSD HOTKEY | Selects which Hotkey activates the OSD function: |
| [Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl]. |
| Since the Ctrl key combination may conflict with programs running |
| on the computers, the default is the Scroll Lock combination. |
|
|
PORT ID | Allows you to position where the Port ID appears on the monitor. |
DISPLAY | The default is the upper left corner, but you can have it appear |
POSITION | anywhere on the screen. |
| Use the Arrow Keys plus Pg Up, Pg Dn, Home, End, and 5 (on the |
| numeric keypad with Num Lock off), to position the Port ID display, |
| then press [Enter] to lock the position and return to the Set |
| submenu. |
|
|
PORT ID | Determines how long a Port ID displays on the monitor after a port |
DISPLAY | change has taken place. The choices are: |
DURATION | User Defined - which lets you select the amount of time (from |
| |
| |
| Always On - which displays the Port ID at all times. |
| If you select User Defined, key in the number of seconds, then |
| press [Enter]. |
| The default is 5 Seconds. A setting of 0 (zero) disables this |
| function. |
|
|
PORT ID | Selects how the Port ID is displayed: the Port Number alone |
DISPLAY | (PORT NUMBER); the Port Name alone (PORT NAME); or the |
MODE | Port Number plus the Port Name (PORT NUMBER + PORT |
| NAME). The default is PORT NUMBER + PORT NAME). |
|
|
(Continues on next page.)
26