Chapter 4. Local Console Operation
Hotkey Beeper Control
The Beeper (see ACTIVATE BEEPER, page 28) can be Hotkey toggled On and Off. When the beeper is set to On, the KH1508i / KH1516i beeps when it switches ports. To toggle the Beeper, key in the following Hotkey combination:
1.Invoke Hotkey Mode (see page 34).
2.Press [B]
After you press B, the Beeper toggles On or Off. The Command Line displays Beeper On or Beeper Off for one second; then the message disappears and you automatically exit Hotkey Mode.
Hotkey Summary Table
The following table summarizes Hotkey operations on the KH1508i / KH1516i:
[Num Lock] + | [Port ID] [Enter] | Switches access to the computer that |
|
| corresponds to that Port ID. |
|
|
|
| [T] [n] [Enter] | Sets the Auto Scan interval to n seconds - |
|
| where n is a number from |
|
|
|
| [A] | Invokes Auto Scan Mode. |
|
| When Auto Scan Mode is in effect, [P] pauses |
|
| Auto Scanning. |
|
| When Auto Scanning is paused, pressing any |
|
| key resumes Auto Scanning. |
|
|
|
| [←] | Invokes Skip Mode and skips from the current |
|
| port to the first accessible port previous to it. |
|
|
|
| [→] | Invokes Skip Mode and skips from the current |
|
| port to the next accessible port. |
|
|
|
| [↑] | Invokes Skip Mode and skips from the current |
|
| port to the last accessible port of the previous |
|
| Station. |
|
|
|
| [↓] | Invokes Skip Mode and skips from the current |
|
| port to the first accessible port of the next |
|
| Station. |
|
|
|
| [B] | Toggles the Beeper On or Off. |
|
|
|
39