Chapter 6. Administration and Configuration

 

 

 

 

(Continued from previous page.)

 

 

Setting

Function

 

 

OSD Hotkey

Selects which Hotkey controls the OSD function: [Scroll Lock]

 

[Scroll Lock] or [Ctrl] [Ctrl]. Since the Ctrl key combination may

 

conflict with programs running on the computers, the default is the

 

Scroll Lock combination.

 

 

ID Display

Selects how the Port ID is displayed: the Port Number alone (PORT

 

NUMBER); the Port Name alone (PORT NAME); or the Port Number

 

plus the Port Name (PORT NUMBER + PORT NAME). The default is

 

PORT NUMBER + PORT NAME.

 

 

ID Duration

Determines how long a Port ID displays on the monitor after a port

 

change has taken place. You can choose an amount from 0 - 255

 

seconds. The default is 5 Seconds. 0 is Always On.

 

 

Scan Select

Selects which computers will be accessed under Auto Scan Mode

 

(see Auto Scanning, page 103). Choices are: ALL - All the Ports

 

which have been set Accessible (see Port Access, page 67);

 

POWERED ON - Only those Ports which have been set Accessible

 

and are Powered On; QUICK VIEW - Only those Ports which have

 

been set Accessible and have been selected as Quick View Ports

 

(see SET QUICK VIEW PORTS, page 28, and Quick View Ports,

 

page 93); QUICK VIEW + POWERED ON - Only those Ports which

 

have been set Accessible and have been selected as Quick View

 

Ports and are Powered On. The default is ALL.

 

 

Scan Duration

Determines how long the focus dwells on each port as it cycles

 

through the selected ports in Auto Scan Mode (see Auto Scanning,

 

page 103). Key in a value from 0 - 255 seconds. The default is 10

 

seconds; a setting of 0 disables the Scan function.

 

 

Screen Blanker

If there is no input from the console for the amount of time set with

 

this function, the screen is blanked. Key in a value from 0–30

 

minutes. A setting of 0 disables this function. The default is 0

 

(disabled).

 

 

Logout Timeout

If there is no Operator input for the amount of time set with this

 

function, the Operator is automatically logged out. A login is

 

necessary before the KH1508i / KH1516i can be accessed again.

 

Enter a value from 0–180 minutes. The default is 30 minutes. 0

 

disables the function.

 

 

Beeper

When set to ON, the beeper sounds whenever the port is switched,

 

when activating the Auto Scan function (see Auto Scanning,

 

page 103), or when an invalid entry is made on an OSD menu. The

 

default is ON.

 

 

Change

Allows a user to change the account password. After clicking the

Password

Change Password button, a dialog box appears. Enter the old

 

password. Then, enter a new password and confirm it by entering it

 

again. Press OK to save changes, or press Cancel to discard

 

changes.

 

 

81