KH1508i / KH1516i User Manual
Adapter Cable Upgrade
The firmware for the KA9520, KA9570, and KA9130 KVM Adapter Cables can also be upgraded. Check the web site regularly to find the latest packages and information relating to them:
Before You Begin
To prepare for the firmware upgrade, do the following:
1.From a computer that is not part of your KVM installation go to our Internet support site and choose the model name that relates to your device to get a list of available Firmware Upgrade Packages.
2.Choose the Firmware Upgrade Package you want to install (usually the most recent), and download it to your computer.
Note: The upgrade files for the three adapter cables aren’t packaged separately. A single upgrade package provides the upgrade files for all of them.
3.Use the Firmware Upgrade Cable (provided with this unit), to connect a COM port on your computer to the Firmware Upgrade Port of the KH1508i / KH1516i.
4.Shut down all of the computers - but not the Stations - on your KVM installation.
5.From your KVM switch console, bring up the OSD (see page 21) and select the F4ADM function.
6.Scroll down to ADAPTER UPGRADE. Press [Enter].
7.In the screen that comes up, press [Y] to invoke Upgrade Mode.
Note: 1. A message appears reminding you to connect an adapter cable. The upgrade takes place via the Cat 5 cable that connects the adapter cable to the KVM switch, however, so there is no need to connect a separate firmware upgrade cable. If all the adapter cables you want to upgrade have already been connected to the switch, simply ignore the message.
2.All the connected adapter cables get upgraded during a single upgrade session.
46