Chapter 4. OSD Operation

 

 

 

 

 

 

Setting

Function

 

 

SCAN/SKIP

Selects which computers will be accessed under Skip mode (see F5:

MODE

SKP, page 44), and Auto Scan mode (see F7: SCAN, page 46).

 

Choices are:

 

ALL – All the ports which have been set Accessible (see SET

 

ACCESSIBLE PORTS, page 41);

 

QUICK VIEW – Only those ports which have been set Accessible and

 

have been selected as Quick View Ports (see SET QUICK VIEW

 

PORTS, page 40);

 

POWERED ON – Only those ports which have been set Accessible

 

and are Powered On;

 

QUICK VIEW + POWERED ON – Only those ports which have been

 

set Accessible and have been selected as Quick View Ports and are

 

Powered On. The default is ALL.

 

 

SCREEN

If there is no input from the console for the amount of time set with this

BLANKER

function, the screen is blanked. Key in a value from 1–30 minutes, then

 

press [Enter]. A setting of 0 disables this function. The default is Off.

 

 

HOTKEY

Enables / Disables the Hotkey function (see Hotkey Operation,

COMMAND

page 47), in case a conflict with programs running on the computers

MODE

occurs. The default is On.

 

 

HOTKEY

This setting selects the Hotkey invocation keys (see Hotkey Operation,

 

page 47). Choices are [NUM LOCK] + [-], or [CTRL] + [F12]. The

 

default is [NUM LOCK] + [-].

 

 

OSD

Sets the language that the OSD displays in. Choices are: English,

LANGUAGE

German, Japanese, Simplified Chinese and Traditional Chinese.The

 

default is English.

 

 

SET

Sets the keyboard language mapping of the console keyboard. The

CONSOLE

default is Auto. If the switch does not automatically receive language

KEYBOARD

mapping from the keyboard, it will set to English (US).

 

 

SET

If there is no input from the console for the amount of time set with this

LOGOUT

function, the operator is automatically logged out. A login is necessary

TIMEOUT

before the console can be used again.

 

This enables other operators to gain access to the computers when the

 

original operator is no longer accessing them, but has forgotten to log

 

out. To set the timeout value, key in a number from 1–180 minutes,

 

then press [Enter]. If the number is 0 (zero), this function is disabled.

 

Default is Off.

 

Note: This feature does not function if Set Login Mode is disabled. See

 

See SET LOGIN MODE, page 43.

 

 

ACTIVATE

Choices are Y (for Yes), or N (for No). When activated, the beeper

BEEPER

sounds whenever a port is changed, when activating the Auto Scan

 

function (see F7: SCAN, page 46), or an invalid entry is made on an

 

OSD menu. The default is On.

 

 

 

(Continues on next page.)

39