Appendix

Rack Mounting

ŠBefore working on the rack, make sure that the stabilizers are secured to the rack, extended to the floor, and that the full weight of the rack rests on the floor. Install front and side stabilizers on a single rack or front stabilizers for joined multiple racks before working on the rack.

ŠAlways load the rack from the bottom up, and load the heaviest item in the rack first.

ŠMake sure that the rack is level and stable before extending a device from the rack.

ŠUse caution when pressing the device rail release latches and sliding a device into or out of a rack; the slide rails can pinch your fingers.

ŠAfter a device is inserted into the rack, carefully extend the rail into a locking position, and then slide the device into the rack.

ŠDo not overload the AC supply branch circuit that provides power to the rack. The total rack load should not exceed 80 percent of the branch circuit rating.

ŠMake sure that all equipment used on the rack – including power strips and other electrical connectors – is properly grounded.

ŠEnsure that proper airflow is provided to devices in the rack.

ŠEnsure that the operating ambient temperature of the rack environment does not exceed the maximum ambient temperature specified for the equipment by the manufacturer

ŠDo not step on or stand on any device when servicing other devices in a rack.

ŠCaution: Slide/rail (LCD KVM) mounted equipment is not to be used as a shelf or a work space.

69