ATEN Technology KL1508A, KL1516A 76

KL1508A / KL1516A User Manual

Adapter Cable Firmware Upgrade Recovery

To perform an adapter cable firmware upgrade recovery, do the following:

1.Unplug the adapter cable from the computer it is connected to.

2.Slide its Firmware Upgrade Recovery Switch (located next to the RJ45 connector) to the Recover position.

3.Plug the adapter cable back into the computer.

4.From your KVM switch console, bring up the OSD (see page 34) and select the F4ADM function.

5.Scroll down to FIRMWARE UPGRADE. Press [Enter].

6.Press [Y] to invoke Upgrade mode.

7.Proceed with the firmware upgrade as described in Performing the Upgrade, starting on page 61.

8.After the upgrade completes and the switch restarts, unplug the adapter cable from the computer and slide the Firmware Upgrade Recovery Switch back to the Normal position.

9.Plug the adapter cable back into the computer.