Chapter 3. Basic Operation
Powering Off and Restarting
If it becomes necessary to power off the KL1508A / KL1516A, or if the switch loses power and needs to be restarted, before starting it back up you should follow these procedures to prevent possible equipment issues:
1.Shut down all the computers that are attached to it.
Note: You must unplug the power cords of any computers that have the Keyboard Power On function.
2.Wait 10 seconds then power it back on. If you have shut down more than one station, power up the highest station first and work your way down to the lowest one. Wait for each station to display its station ID on the front panel LED before powering on the next one.
3.After the station(s) is (are) up, power the computers back on.
Port ID Numbering
Each computer on the installation is assigned a unique port ID. The port ID is a one or two segment number that is determined by the stage level and port number of the switch that the computer is connected to.
The first segment represents the stage level of the switch (04, for example); the second segment represents the number of the port that the computer is plugged into.
For example, if a computer is connected to KVM port 3 of a switch that is in the 12th position of the daisy chain, it would have a port ID of
Note: Single digit numbers
31