| Chapter 4. OSD Operation |
|
|
|
|
|
|
Setting | Function |
|
|
SET CAT 5 | Lets you specify how long the Cat 5/6e cable between the port and the |
LENGTH | KVM adapter cable is. Press [Spacebar] to cycle through the cable |
| length settings: |
| S: Short – for up to 25 m |
| M: Medium – for between 20 and 35 m |
| L: Long – for above 35 m |
| An S, M, or L appears next to the port to indicate the choice. |
|
|
SET | Sets the keyboard language layout for the computers attached to each |
KEYBOARD | port. Press [Spacebar] to cycle through the choices: The default is |
LANGUAGE | English (US). |
|
|
SET | This setting selects which console(s) (internal/external) are enabled: |
CONSOLE | 0 Both consoles enabled |
MODE | |
| 1 LCD Console only |
| 2 External console only |
| Use the spacebar to cycle through the choices. The default is 0. |
| Changes will not be saved until you logout. |
|
|
FIRMWARE | In order to upgrade the KL1508A / KL1516A and adapter cable |
UPGRADE | firmware (see The Firmware Upgrade Utility, page 59) you must first |
| enable Firmware Upgrade mode with this setting. |
| When you bring up this menu, the current firmware version levels |
| display. Select Y to enable Firmware Upgrade mode, or N to leave this |
| menu without enabling it. |
|
|
ADAPTER | This function allows the administrator to check the firmware version of |
UPGRADE | the KVM adapter cable. When you bring up this menu, the current |
| firmware version levels display. See FIRMWARE UPGRADE, above, |
| also. |
|
|
SET LOGIN | This function allows the administrator to request users to login or not. |
MODE | When the login dialog box is disabled, the system disables the login/ |
| logout function. If the system is |
| remains disabled. |
|
|
43