ATI Technologies QA-342, QA-341 user manual Getting Started, Setting the Access Point AP

Chapter 3 Getting Started

3 Getting Started

This QA-341/342 WiFi phone has a built-in Setup Wizard for setting up the phone. It will guide you step-by-step from wireless AP (access point) setup to SIP (session initiation protocol) account setup.

Note: The Setup Wizard can only be seen the first time the phone starts up after a master reset, but the individual steps required for setup can be accessed at any time through the phone’s menu.

Setting the Access Point (AP)

STEP 1. When the phone is powered on for the first time, it guides you to search for a wireless network. Press the Ok soft key to start.

STEP 2. There are three possible methods for connecting to a wireless network:

￿Pushbutton WPS (WiFi protected setup)

or

￿PIN Mode WPS

or

￿Manual

(AP Setup Method 1) Using Pushbutton WPS

When you see the display as illustrated in step 2 above, push the WPS button on your access point.

￿The phone displays the following screen:

6