54 HDTV Support
Add an HDTV format
The Predefined and Custom HDTV Formats list box should list any
standard and optimized HDTV formats supported by the digital panel’s
EDID. If the list is empty, then no HDTV formats are natively supported.
1From the Tree View pane, expand Digital Panel Properties.
2Click HDTV Support.
3Select either 720p in HDTV modes supported by this display.
4Click Apply formats.
5Click Add.
• A group of four arrow buttons and a large rectangle is overlaid on
the screen. Use these arrows to increase or decrease the width and
height of the rectangle until the blue background is just visible.
•Click Maintain aspect ratio to maintain the ratio between width
and height while making adjustments.
6Click Accept.
7Click OK in the HDTV Format warning message box.
8Click Apply to add your new HDTV format to the Predefined and
Custom HDTV Formats list and the Displays Manager mode list.
Remove an HDTV Format
1From the Tree View pane, expand Digital Panel Properties.
2Click HDTV Support.
3Click to highlight the HDTV format to be removed in the Predefined
and Custom HDTV Formats list box.
4Click Remove button.
Note: The removed format will be removed from the Displays
Manager mode list once the computer has been rebooted.
LWAR NIN G!: This option is only intended for displays that
report incomplete or incorrect EDID information. Adding
this setting could damage your digital flat panel display.
USE WITH CAUTION!