CrossFire™ 91
3Ensure the application override is enabled. To do so, make sure the
Let the Application Decide check box is not selected.
4Click and drag the slider to the desired setting.
Note: The slider control becomes unavailable when Let the
Application Decide is enabled.
Set Catalyst™ A.I. settings
1From the Tree View pane, expand 3D.
2Click Catalyst™ A.I.
3If necessary, clear the check mark from Disable Catalyst™ A.I.
4Click and drag to slider to the desired setting.
Note: Change to Catalyst™ A.I. settings is not shown in the 3D
Preview.
Apply your settings
1Click Apply to save your changes and leave the Catalyst™ Control
Center open.
2Click OK to save your changes and exit the Catalyst™ Control
Center.
Discard your settings
•Click Discard to ignore any unsaved changes and restore the
settings that existed when the Catalyst™ Control Center was
opened or the last time Apply was used. Discard does not close the
Catalyst™ Control Center.
Clicking Discard applies to all features of an aspect, not just the feature in
the current view.
Change motherboard BIOS settings
Some motherboards may have a system BIOS option to switch between
single or dual PCIe™ slot support. The default setting may be single slot
support.
Refer to the motherboard’s manual for information to enable dual PCIe™
slot support.
For more information see the CrossFire™ Web page at:
ati.com/crossfire